Carefully peel back off sheet. Be sure to support center circle area.
Spray down Cap FX insert with soapy water. The center circle area is
supported by 4 spars for easier installation.
You can cut these away carefully after drying for a floating center
cap look if you prefer.
Next spray down fuel door area. Then place insert on top and carefully
slide into place. Stand back and look at your fuel door at a distance
and check it from all angles for best fit. If you are off you can lift
it off and re-align before it dries.
BE SURE as your insert dries, that you hold it down in one area
while pushing out air bubbles with your other hand. Best to assemble
in the shade. Once dry, let it also dry in the sun for a day before
washing the car.
check for air bubbles AS your cap insert dries and press them out before
it completely dries.
Shown in silver on 2000 - 01
Shown in silver on 94 - 98
Shown in Black